- 12_button_install.JPG
Back at home, we start to assemble the top panel. We use two buttons to align the poster, then trim it around the edges. - 11_glue_clamped.JPG
The box, glued and clamped. - 10_glue_prepare.JPG
The lower box pieces aligned for gluing. - 09_mb_mount_test.JPG
Hey look, we drilled the holes in the right place! - 08_drill_for_MB_mount.JPG
We drill holes for the machine bolts that will hold the motherboard in place. - 07_bryan_routes_joysticks.JPG
Bryan uses the template to route out an extra 3/8" of material so the joysticks will extend higher from the top of the panel. - 06_laser_template.JPG
On a second trip to the Sawdust Shop, we use the laser cutter to make a template for routing out some MDF at the joystick mounts.