« 2008
2010 »
January
February
March
April
May
June
July
August
September
October
November
December
All
- IMG_6728.jpg
Our apricot tree bloomed! - 07_bryan_routes_joysticks.JPG
Bryan uses the template to route out an extra 3/8" of material so the joysticks will extend higher from the top of the panel. - 10_glue_prepare.JPG
The lower box pieces aligned for gluing. - 11_glue_clamped.JPG
The box, glued and clamped. - IMG_6880.jpg
a little pesto, in case the goat needed some help - IMG_0186.jpg
Bryan after beer #1 - 05_cnc_drills.JPG
CNC machine begins drilling holes. - IMG_6902.jpg
cooking on Friday - IMG_6799.jpg
Bryan, Leslie, Susan, and Marc - IMG_6725.jpg
Sous, in repose - IMG_6806.jpg
Bryan works on the beer for Heather and Jesse's wedding in March - IMG_6892.jpg
Cam heads down the road at Redwood Regional Park - IMG_0184.jpg
And move directly on to beer. - 06_laser_template.JPG
On a second trip to the Sawdust Shop, we use the laser cutter to make a template for routing out some MDF at the joystick mounts. - IMG 0502
Doug and Kalia host a Christmas dinner, featuring the better part of a cow. (Clare's) - cthulhu_context.jpg
- IMG_0201.jpg
one of everything - IMG_0203.jpg
Leslie bought this cheap to put our Christmas tree on, and it now serves as a magazine table. - IMG_0506.jpg
- IMG_7026.jpg
I think she's totally in the air in this shot. - IMG_6889.jpg
Sous had been sneaking onto our white couch, so we finally gave up and authorized it. - cthulhu_close.jpg
- IMG_6994.jpg
radish harvest - 16_wire_closeup.JPG
- IMG_0202.jpg
"before" shot of a beat-up old pot stand - 08_drill_for_MB_mount.JPG
We drill holes for the machine bolts that will hold the motherboard in place. - 14_doug_solders_buttons.JPG
Doug solders the ground loop with the help of Negra Modelo. - 12_button_install.JPG
Back at home, we start to assemble the top panel. We use two buttons to align the poster, then trim it around the edges. - IMG_6888.jpg
Leslie and Sous check out the neighborhood. - IMG_6800.jpg
garden: day seven